Operator’s manual – ANKOM RF User Manual

Page 30

Operator’s Manual

pg. 30

Rev F 8/29/14

Module Name – Cells within this row display the Module identification number or name. By default,
these cells display numbers. To change a cell within the

Module Name row, highlight the cell and type.

The text typed into a

Module Name cell does not wrap when the text reaches

the end of the cell. Therefore, if you type a long name in the cell, the column for
that Module will widen and reduce the amount of data that can be viewed on
one screen.

This cell becomes ORANGE

when the Module has not communicated with the computer for at least 5

minutes. An example of an indication of communication loss is shown below.

If the

Module Name cell turns ORANGE during a run, first try unplugging the

battery pack for that Module and plugging it back in. This resets the Module.
This could result in some missing data points while the reset is occurring.
However, data captured before and after the reset will remain.

Browse

Version: 9.8.3