360 Systems MAXX2400HD - Manual (Page 27)

Page 26 MAXX-2400HD Owner’s Manual
not use older monitors that are not VESA compliant. The server will not start properly if an
unsuitable monitor is connected.
Serial Port
The rear panel serial port is not used. Make no connection.
USB Ports
The rear panel USB ports are used for software updates. As of version 1.07.559 the USB ports
can support keyboard and mouse operation, but it is still recommended to use PS-2 devices.
Currently, a PS-2 keyboard is required for update operations using a USB drive as the limited
operating system on the USB drive does not support USB keyboards.
Power Switch (not shown in Figure 2)
Shutdown the system only by momentarily pressing the front panel power button, or through
the SHUTDOWN command on the On-Screen user interface.
PRESSING THE FRONT PANEL POWER BUTTON FOR FOUR SECONDS WILL FORCE A
SHUTDOWN. USE THIS METHOD ONLY IF THE UNIT IS NOT RESPONDING.