beautypg.com

MagnaFlow CHEVROLET DIESEL SILVERADO 3500HD Black Series Kit Diesel PERFORMANCE EXHAUST User Manual

MagnaFlow For the car

background image

BILL OF MATERIALS:

SHOP SUPPLIES:

MINIMUM REQUIRED TOOLS:

To ease removal of existing exhaust components
(especially on older vehicles) spray penetrating lubricant
on all fasteners and hangers/insulators that will be
loosened or removed and let soak before disassembly.

SPRAY LUBRICANT

WEAR SAFETY

GLASSES

READ INSTRUCTIONS

THOROUGHLY BEFORE

INSTALLING PRODUCT

MAGNAFLOW RECOMMENDS PROFESSIONAL INSTALLATION ON ALL THEIR PRODUCTS

WARNING: When working on, under, or around any vehicle exercise caution. Please allow the vehicle's
exhaust system to cool before removal, as exhaust system temperatures may cause severe burns. If working
without a lift always consult vehicle manual for correct lifting specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death could occur if safety measures are not followed.

ATTENTION: Always install any supplied band or U-bolt clamps to the proper torque specifications of 40-45
ft-lbs for band clamps and 30-35 ft-lbs for U-bolt clamps. Over tightening will result in the clamp breaking and
will NOT be warranted by MagnaFlow.

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905

Technical Support: 1(800) 959-9226 | Email: [email protected]

15mm

PART NO. 17054

2015 CHEVROLET 2500HD 6.6L BLK

HARDWARE KIT:
1.[2] 4.00" Clamp

1. INLET PIPE
2. TAIL PIPE ASSY

Hanger Tool
(Or Pry Bar)

SAWZALL,SIMILAR
CUTTING TOOL

1

2

This manual is related to the following products: