Cabletron Systems TSX-1620 - Manual (Page 31)

Device ConÞguration View
ConÞguration Views
3-2 TSX-1620
Management Module Guide
¥ Highlight the device icon and select ConÞguration from the Icon
Subviews menu.
Device ConÞguration View
The Device ConÞguration view for the TSX-1620 provides detailed
information on the TSX-1620Õs network, host, port, and model conÞguration.
This view provides the following device conÞguration-speciÞc information:
Device Name
The user-deÞned device name. This Þeld is updateable.
Contact Status
The status of the TSX-1620. Possible values are Established, Lost, or Initial.
Number of Interfaces
The number of ports on the TSX-1620.
Allows you to the access Interface Address Translation Table; the Þelds are
described below. This table can be updated.
Interface Index
A unique value for each interface. Its value ranges between 1 and the value of
the ifnumber. The value 0 for each interface must remain constant at least
from one reinitialization of the entityÕs network management system to the
next reinitialization.
Physical Address
The interfaceÕs address at the protocol layer immediately below IP in the
protocol stack. The Ethernet address of the bridge is returned, for both
channels of the bridge.
Go Back
Go Up
Icon Subviews
view Path
New view
Bookmarks
view History
Current view Info...
Notes...
Jump by name...
Zoom
Map Hierarchy
Close
Navigate
Alarms
Performance
Notes...
Utilities
Zoom
Device
Configuration
IF Address Translation