MagnaFlow NISSAN TRUCK JUKE Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: (Carefully read all instructions before
installation) To remove the OEM exhaust system,
unbolt the flange at the catalytic converter and
disengage the welded hangers from the rubber
isolators, save the isolators and OEM fasteners as
they will be re-used in the installation of your new
system.
Step 2: Begin installation of the Magnaflow
exhaust system by fitting the Inlet Pipe Assembly to
the catalytic converter using the OEM fasteners and
fitting the hangers into the rubber isolators. Install the
Mid-Pipe to the Inlet Pipe Assembly with the supplied
2.25" clamp (Leave all clamps and fasteners loose
until final adjustment ). Install the Muffler Assembly
in the same fashion.
Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between the
exhaust system and any body panels to prevent
heat-related body damage or fire.)
Step 4:
Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 40ft-lbs). U-bolt clamps should
be tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and
retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15489
2011 Nissan Juke 1.6L Turbo Catback System
Warning : When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500 08/26/11
INLET PIPE
ASSY
MID-PIPE
MUFFLER
ASSY
[2] 2.25" CLAMPS