MagnaFlow LINCOLN TRUCK MKX Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1:(Carefully read all instructions before
installation) Remove the OEM exhaust system by
unbolting it at the flange, then disengage the welded
hangers from the OEM rubber insulators. Do not
discard the OEM fasteners or damage the rubber
insulators as they may be reused to mount the new
system.
Step 2: Install the new inlet muffler assembly reusing
the OEM bolts. Fasten the new extension pipes by
mounting them to the front muffler assembly using
the supplied 2.25" clamps. Fit the welded hangers of
the new rear muffler assembly into the OEM rubber
insulators and fasten it to the extension pipes using
the supplied clamps (Leave all clamps and fasteners
loose for final adjustment of the complete system.)
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). U-bolt clamps should be
tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and retighten
if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15482
2011 Ford Edge/Lincoln MKX - 3.7L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
Apr 18, 2012
Rev: 000
Front Muffler Assy.
Extension Pipe P/S Extension Pipe D/S
Rear Muffler Assy.
4x 2.25" Clamps