beautypg.com

MagnaFlow FORD TRUCK FLEX Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Page 2

background image

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905

Technical Support: 1(800) 959-9226 | Email: [email protected]

Step 1.

begin removal of the OEM system by

loosening the clamp at the outlet the flex pipe.
Working front to rear detach all hangers from rubber
insulators and remove the system. Retain rubber
insulators as they will be re-used the mount the new
system.

Step 2.

Begin installation of the new system by

fastening the Resonator Assembly to the outlet of
the flex pipe using the supplied 2.25" clamp.

Step 3.

Next attach the Mid-Pipe Assembly to the

Resonator, followed by the Y-Pipe Assembly. Use
supplied 2.50" clamps and fit hangers into rubber
insulators.