MagnaFlow CHEVROLET TRUCK C10 PICKUP Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1:(Carefully read all instructions before
installation) Remove the existing exhaust system
from the exhaust manifolds / headers. Some
systems may need to be cut for removal.
Step 2: Place the hanger in the existing hole (drill
in holes if necessary), and fasten using the
supplied hardware. Install the supplied rubber
insulators and hang the mufflers in place. (See
Figure 1)
Step 3: While the mufflers are hanging, install the
X-pipe assembly using the supplied 2.50" clamp.
Next position and install the front inlet pipe
extensions with the 2.50" clamp.
Step 4: The inlet pipe extensions can be cut on
both ends to accommodate different header and
manifold spreads. From these pipes, header
connectors flanges can be welded or custom
manifold down pipes can be attached.
Step 5: Install the tail pipe extentions to the over
top axle muffler pipes, using the supplied
fasteners. Next install your choice of tailpipe exits
with the supplied fasteners and hangers mounted
in a similar fashion as the mufflers (See Figure 2).
You also have the option to install tips on the end
of your tailpipe exits, which will need to be welded
on.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15222
'47 - '54 Chevrolet Pick Up
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
March 20, 2013
Rev: 000
INLET PIPE
EXT. D/S
[8] 2.50"
CLAMPS
X-PIPE ASSY
MUFFLER ASSY
P/S
MUFFLER ASSY
D/S
TAIL PIPE
EXT. P/S
TAIL PIPE
EXT. D/S
TIP OPTIONAL TIP OPTIONAL
TAIL PIPE
OPTIONS TAIL PIPE
OPTIONS
[4] THREADED
HANGER
INLET PIPE
EXT. P/S