MagnaFlow FORD FUSION Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: Begin removing your OEM exhaust system
by first unfastening the two bolt flange at the outlet of
the catalytic converters. Working front to rear loosen
the clamps holding the exhaust system together and
detach all hangers from the rubber insulators. Retain
the insulators and fasteners as they will be used to
install your new exhaust system. Remove the system
from the vehicle.
Step 2: Install your new MAGNAFLOW system by
first attaching the Resonator Assembly to the catalytic
converter outlet using the OEM fasteners. Next, slip
the Extension Pipe Assemblies onto the Resonator
Assembly in the specified order and secure using the
supplied 2.50" clamps. Install the Muffler Assembly in
a similar fashion and locate all hangers into the
rubber insulators.
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). Inspect all fasteners after
25-50 miles of operation and retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15202
2013 Ford Fusion 2.0L Turbo
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
11/14/12
Rev: 000
Resonator
Assy
Extension Pipe "B"
Assy
[3] 2.50"
Clamps
Extension Pipe "A"
Assy
Muffler
Assy