MagnaFlow DODGE DART Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: Begin removing your OEM exhaust system
by unblolting the flange at the outlet of the catalytic
converter. Working front to rear detach all hangers
from the rubber insulators. Retain the insulators and
flange fasteners as they will be used to install your
new exhaust system. Remove the system from the
vehicle.
Step 2: Install your new MAGNAFLOW system by
first attaching the Inlet Pipe Assembly to the catalytic
converter outlet using the OEM fasteners and fitting
the hangers into the rubber insulators. Install the
Mid-Pipe by slipping it onto the the Inlet Assembly
and loosley secure with the supplied Clamp. Install
the Muffler and Tailpipe Assemblies in a similar
fashion.
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). Inspect all fasteners after
25-50 miles of operation and retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15181
2013 Dodge Dart 1.4L Turbo
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
08/27/12
Rev: 000
Mid-Pipe
Inlet Pipe
Assy
Muffler
Assy
P/S Tailpipe
Assy
D/S Tailpipe
Assy
[4] 2.25"
Clamp