Record on a tape, Check list before you begin, Selecting the input mode – Panasonic pvm1348 User Manual
Page 17: Press ch at, or numbered keys on the, One touch timer recording (otr), One touch recording (otr)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Record On a Tape
Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
Model RV-M2038 unit is shown here.
4
3
Selecting the Input Mode
You can select the Input Mode in either of the
following ways.
■ Press CH AT . The display will change in
the order below.
C
—*-1—2 — 3
" -v
(CABLE)
(TV) J
LINE-<------ 125 or 69-^^
a
Press ACTION to display the MAIN MENU,
b
Press AT^^ to select ‘TV," and then
press ACTION to display the SET UP TV
screen.
c
Press
AT
to select “INPUT SELECT."
and then press ► repeatedly to select
‘TUNER" or “LINE."
1
Insert a cassette
with record tab
The Combination VCR power
comes on automatically.
Press CH AT, or
NUMBERED keys
on the
remote control to select a
channel.
• Or, press CH AT on the
Combination VCR.
• To record from an outside
source, press CH
at
to select
LINE input (see bottom of this page).
Press SPEED
repeatedly
until the desired tape
speed is displayed (see
page 25).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
REC
Press
REC/TIME on the
remote control to start
recording.
• Or, press RECTIME on the
Combination VCR.
• To edit out unwanted portions,
press PAUSE to pause the
recording in progress. To release, press PAUSE again.
• You can not view another channel during recording.
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
One Touch Timer Recording (OTR)
The Combination VCR stops recording at a preset time.
In step 4, press REC/TIME repeatedly to set the
length of the recording. Each press will change the
time as shown.
c
Normal Ree—►0:30—►1:00
00
3:00-^ 2:00 ♦-1:30
1:00-V
:30-^^
The PROGRAM TIMER indicator lights on the front panel.
5
Press STOP
on the remote control to stop
recording.
• Or, press STOP/EJECT on the Combination VCR.
While it is possible to change the tape
speed when you are recording, there will
be some distortion on the tape where the
change occurred.
The remaining recording time of an OTR
can be displayed by pressing DISPLAY.
After the Combination VCR has been in
Rec Pause mode for 5 minutes, it will
stop automatically to protect the tape and
video head.
17