Making a copy, Copying, Recording vcr – Panasonic NV-SJ200 User Manual
Page 24: Operations, Preparations, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a Copy
Copying
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
Recording VCR
AUDIO IN ©/VIDEO IN©
/
Other VCR or
Video movie camera
Operations
1
Press the Play button © to start playback.
2
At the point where you want to join a new scene, press
the Pause/Slow button © to put it in the still playback
mode.
3
Press the REC button © to put it in the recording pause
rriode.
4
Start playback on the source unît and search for the
point from which you want to record (copy) onto this
VCR.
5
When that point is reached, press the Pause/Slow
button O again to start recording the new picture and
sound from the playback unit.
6
To record (copy) additional scenes, press the Pause/
Slow button O fo puf VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7
At the point where you want to stop recording, press the
Stop button O to finish recording.
Preparations
• Connect a video movie camera or another VCR to this VCR
as shown.
• Display the VCR picture on the TV.
• Insert the cassette on which the copying is to be
performed, and make sure that its erasure prevention tab is
not broken out.
• Select the audio source required by pressing the INPUT
SELECT button © to set AV.
Notes:
• If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.
• If “DIRECT REC" is set to “ON”, set to “OFF and disconnect
Audio/Video cable from TV.