Checking a timer programme, Cancelling a timer programme – Panasonic NV-SJ200 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking a Timer Programme

• The VCR must be turned on, or in tinner recording standby

mode.

• Confirm that the TV is on and the VCR viewing channel is

selected.

1 Press the PROG./CHECK button twice.

Press the MENU button © to
exit the On Screen Display.

On Screen Display

Cancelling a Timer Programme

• The VCR must be turned on, or in timer recording standby

mode.

• Confirm that the TV is on and the VCR viewing channel is

selected.

1 Press the PROG./CHECK button O

twice.

2 Press the PROG./CHECK button

repeatedly until the desired timer
programme number flashes on and

off.

3 Press the CANCEL button

exit the On Screen Display.

Note:

• If timer recording is not completed {due to insufficient tape

or cancellation by the user), the programmed timer

recording data will be cancelled from the memory by

4 A.M the next day.

However, if the timer recording function is activated at that

time, the programmed timer recording data will not be

cancelled.