Weak signal display on/off, Display main menu, Press action – Panasonic AG-520D PROLINE User Manual
Page 23: Display set up ch screen, 1) press to select “ch, 2) press action to display, Select weak signal display, 1) press at to select, 2) press ► to set “on” or “off, Return to normal screen
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special VCR Features
Weak Signal Display ON/OFF
When “ON” is selected, picture is displayed even when
broadcast signal is weak or nonexistent.
Display MAIN MENU.
Press ACTION.
2
MAIN MENU
SELECT :A ▼
► KEY
:ACTION KEY
Display SET UP CH
screen.
1) Press
to select “CH.”
2) Press ACTION
to display.
3
—— SET UP CHANNEL ----------------
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
IWEAK SIGNAL
01
SPLAY;
OFF
SELECT:A ▼ KEY
SET :
KEY
END : ACT I ON KEY
Select WEAK SIGNAL
DISPLAY.
>)
1) Press
A T
to
select.
2) Press ► to set
“ON” or “OFF.”
“ON” = Picture is displayed regardless of signal condition, and
may not always be clearly visible.
“OFP = Screen turns solid blue when signal is absent or weak.
If Combination VCR is connected to equipment which has blue
back feature, selecting “ON" will have no affect on the other
equipment.
Return to normal screen.
Press ACTION twice.
23