Panasonic AG-520D PROLINE - Manual (Page 22)

Tape Operation (continued)
Tape Position Display
To find out the present tape position. Tape position cannot be
found for C-Cassette type and tape of less than 60 minutes.
Detect Tape Position.
Press TAPE POSITION.
“DETECTING TAPE POSITION"
is only displayed when a cassette
is first inserted.
It takes several seconds for
correct tape position to appear.
Indication is standard.
Return to normal screen.
Press TAPE POSITION.
Zero Search
To quickly return to a specific tape counter location.
Display the Counter.
Press DISPLAY during playback.
b PLAY 12:00AM
0:00:30
Reset to “0:00:00.”
SP
COUNTER
i I
RESET
Press COUNTER
RESET at the
desired position.
Continue playback, rewind, or fast forward.
d
STOP 12:00AM ABC
-0:26:00
SP
Return to “0:00:00.”
Press 2ERO/1 MIN
in Stop mode.
• The Combination VCR
will go into FF or REW
mode and stop at the
last point the Counter
was set to 0:00:00.
ZERO/
a
1 MIN
Play Lock mode
The Combination VCR may be locked in Repeat Play mode so
that all other function keys are inoperative. (See page 10.)
^ To turn
PLAY LOCK
REPEAT ON PLAY
ON.”
In Repeat Play mode,
hold down PLAY on the
remote or Combination
VCR for 7 seconds.
To turn “OFF.”
Repeat above operation
in Play Lock mode.
When the Play Lock mode is selected,
• the Auto Repeat function is activated automatically.
• the On Timer and Sleep Timer become nonfunctional.
22
One Minute Skip
Combination VCR fast forwards over
60 seconds of recorded tape.
Skip over 1 minute.
Press ZERO/1 MIN in
Play mode.
Auto Operation Functions
Auto Playback with Repeat
Function
Insert a tape in Power off mode
Power turns on automatically
• Repeat Play begins automatically if a
tape has no record tab.
Auto Rewind
(Repeat Play is “OFF”)
A tape reaches its end Rewind
begins Stop automatically
Playback Auto Eject
(Repeat Play is “OFF")
A tape has no record tab reaches its
end Rewind begins Ejects
automatically
Memory Rewind off
Press POWER in REW mode
Rewind is completed Power turns
off automatically