Fast forwarding and rewinding a cassette, Press ff mode, Press during play mode – Panasonic RX-ED77 User Manual
Page 11: Selecting the reverse mode, Press rev mode to select the mode, m, To listen continuously to two tapes in succession
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ustening to Cassettes
REWI^/CD
Fast forwarding and rewinding a cassette
Press FF
mode.
or REW [TPS] when cassette is in stop
Rewind
Fast foriv ard
Main unit
v/
a
/^W
Remote control
REW [TPi
FF iTPlI
Finding the beginning of a track
(TPS: Tape Program Sensor) B
Press the button once for each track to be skipped (up to
9 tracks).
Press during play mode.
Backward
Forward
Main unit
v/ ]-^-4
a
/^H
Remote control
REW [TPi
FF [TPi
0}
c
I
-Wt
Current track
3
2
1
Number of times the
button is pressed
2
3
-
1
2
3
4
a
«
7
I
Play from this point
P'
REV MODE-
d )
c : ^ : > z Z Ì
t___________ I Ì
Reverse mode
flEVMODE
r p o r
•
n n n
Í 1 f i i _
uuu^
►Since the blank spaces between tracks are used for locating the
begining of each track, the TPS function may not operated in the
following cases:
When the blank spaces aré 4 seconds or less.
When there are no blank spaces on the tape (such as when the
recording has been made from a microphone, etc.).
When there are parts of a track which have been recorded at a
particularly low level or which have not been recorded at all (such
as with classical music).
When 10 or fewer seconds untÜ elapsed since the begining of a track
or when there are 10 or fewer seconds until begining of the next
track.
When a tape is recorded with fade-ins or fade-outs.
►When you press ► to start playback on one deck during fast
forwarding or rewinding on another deck, fast forwarding or re
winding will be stopped.
Selecting the reverse mode
(Available only from the remote control)
Press REV MODE to select the mode, m
Tlte display changes each time the button is pressed. ©
The tape plays from the side facing up to reverse side, and
then it stops automatically.
The tape plays repeatedly until ■ (STOP) is pressed.
(When cassettes are inserted into both decks, both play contin
uously.)
Only one side of the tape is played, and then the tape stops
automatically.
To listen continuously to two tapes in succession:
1. Load tapes into deck 1 and deck 2.
2. Select the reverse mode i C ^ D ) -
3. Select which deck is to start tape by pressing DECK 1 /2.
4. Press ► to start the tape play.
The tape plays from repeatedly until ■ (STOP) is pressed.