Case 1, Case 2), Important note for auto clock set – Panasonic OMNIVISION PV-8200 User Manual
Page 13: Case
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[Case 1
If the displayed time is correct,
press CH A to exit.
• This concludes one time VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the
VCR have recognized the PBS channel (setting
channel) in the wrong time zone. Please do the
following to correct the situation.
a Make a note of the SETTING:CH number shown
on-screen and press CH
A
to exit.
b
Delete the setting channel from the VCR channel
memory. (See “To Add or Delete a Channel”
section on page 14.)
c Press ACTION to display the menu.
d Press
AT
to select “SET CLOCK," and then
press ► to display the “SET CLOCK” screen.
e Press
AT
to select “AUTO CLOCK SET,” and
then press ► to display the “CLOCK AUTO SET"
screen.
f
Press CH
A
to start Clock Auto Set.
• If you use a cable box and have multiple PBS stations,
tune the cable box to a different PBS station and try
auto clock set using the menu.
[Case
2
)
If the screen above appears, auto clock set
is not available in your area. Please set the
clock manually as described below.
ACTION
a Press ACTION to display
the “SET CLOCK" screen.
b
Press
AT
and ► to
select and set the month,
date, year, time, and DST.
(Daylight Saving Time).
l-\4/— SET CLOCK------------
SELECT:* ▼ KEY
SET ;► KEY
EMD :ACTION KEY
' See page 5 for more
on DST.
To Make Corrections,
repeatedly press ► to move the cursor to the
incorrect entry and make the correction.
c Press ACTION twice to
start the clock and exit
this mode.
--------- SET CLOCK-----------
4/2000 TUE 12:
SET
► KEY
START :ACTI ON KEY
SELECT/SET
{^▼◄►)
keys
CHANNEL UP
IMPORTANT NOTE FOR AUTO
CLOCK SET
• Auto clock set will be performed when
the VCR is turned off the first time each
day. If you use a cable box and you
want auto clock set to be performed, the
cable box must be left on and tuned to
the PBS channel before the VCR power
is turned off.
• If you use a DSS receiver, it must be
turned off for auto clock set.
• If you use AudioA/ideo Jack connection
between the VCR and Cable Box or
DSS receiver, you must also connect
the RF coaxial cable in order to use the
auto clock set and channel auto set
features.
13