Indoor unit, Panasonic, Automatic operation mode operation procedure – Panasonic CS-1873KR User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® Automatic Operation Mode
Operation Procedure
Indoor Unit
open the front panel
CD-
EEHD
£ AUTO FAN
SLEEP OFF/ON
.----------L -------------- ^
A/1NG
MODE TE i/IP. FAN SPEED
MAN JAL
AIR SWING —
3
-0
Set the Power Switch to “I” (ON)
7
Select Automatic Operation.
Press the Operation Mode Selection Button.
Operation Display
MODE
EHO
AUm FAN
2
Set the temperature.
Operation Display
Ena
H
AUTO FAN
Depending on your personal
preference, clothing, etc. the
set temperature can be set to
TEMP.
higher | or lower [|
than the standard ^ if
W-
desired.
----- To raise the Temperature 2°C
To lower the Temperature 2X
3
Set fan speed.
Operation Display
IS
®
®
■III!
• Select the fan speed in three
steps, Low through High.
• The display here shows the
fan speed to "High”.
4
OFF/ON—[
Press the Off/On Button.
Panasonic
(For automatic operation, the operation lamp will first blink
for 20 seconds and then remain lit.)