Panasonic NV-SD230A - Manual (Page 17)

Option Setting
To Select the Corresponding Video
Cassette Tape Length to Display the
Approximate Remaining Tape Time
(TAPE SELECT)
1 Press MENU.
On Screen Display
(ENTER)
(X)
: 0
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADO&DELETE
ЮРЛО«
■ ■ ■ ■ ■ ■ ■ '
3 Select TAPE SELECT.
CD)
ГТТТТТТТТ:
TAP È SELECT (EieO)
NTSC 1NPUT SELECT (AUTO)
NTSC PB SELECT (onPALTV)
NTSC CONVERTER (OFF)
JET REWIND (ON)
POWER SAVE (OFF)
CD
4 Select the corresponding video cassette tape length.
TAPE SELECT “(¡ElAS
NTSC INPUT SELECT (AUTO'
NTSC PB SELECT (onPALTV
NTSC CONVERTER (OFF]
JETREWINO (ON'
POWER SAVE (OFF
E180: For E30, -60, -90, -120, -150 and -180 tapes.
El 95; For E195 tape.
E240: For E240 tape.
E260: For E260 and -300 tapes.
• The remaining tape time may not be displayed
correctly depending on the tape used.
Press MENU twice to make the on screen display
disappear.
(MENU
NTSC INPUT SELECT
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC INPUT SELECT,
О
CD
□
Select AUTO.
Allows NTSC 4.43 or 3.58
signals to be distinguished
automatically..
NTSC INPUT SELECT
NTSC PB SELECT (onPALT
NTSC CONVERTER
(OFF
JETREWINO ion '
POWER SAVE (OFF
• Normally set at this position. If the tape has not
recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals from an
external signal source.
3.58: When recording NTSC 3.58 signals from an
external signal source.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
Press MENU twice to make the on screen display
disappear.
(MENU
NTSC PB SELECT
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC PB SELECT.
CE)
CX>
NTSC INPUT SELECT (ÀUTO)
NTSC PB SELECT (onPALTV)
NTSC CONVERTER (OFFf
JETREWINO (ONt
POWER SAVE (OFF)
J..S J Ci '.i:. i'' 1 ■ is
Select the desired position according to the colour TV
system of the TV.
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERT№
JETREWINO
POWER SAVE (A uto !
íoFñ
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
Press MENU twice to make the on screen display
disappear.
(MENU 17