Panasonic PVQ-M2508 - Manual (Page 23)

Timer recordings must be recorded
back to back in order for them to be
piaced on the Program Index list, if a
timer recording is followed by a
function, such as REW or PLAY the
data is lost.
Program Index Search
(For timer recordings oniy.)
This feature allows you to choose a timer recorded program from a
Program Index list, and then start a search for that program.
• Once a tape is ejected or normal recording Is started, all program
index data is erased.
1
Press INDEX in Playback or Stop
mode to display the INDEX screen.
2
Press to select “PROGRAM
INDEX SEARCH,” and then press
► to display the PROGRAM
INDEX screen.
3
Press AT to select the desired
recorded program, and then
press ► to start the forward or
rewind search.
• When the designated program is
reached, the Combination VCR
automatically goes into Playback mode.
INDEX SEARCH
ROGRAM INDEX SEARCH
12/20 1O:00A SPORTS ABCD
12:30P MOVIE
B:OOP COMEDY
3:00P MUSIC
NBC
CBC
NBC
SELECT:* » KEY
SEARCH:► KEY
END :INDEX KEY
Index Scan
(For normal and/or timer recordings.)
This feature allows you to scan (forward or reverse) each recording for 10
seconds in Playback mode.
3 Press INDEX in Playback or Stop
mode to display the INDEX screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
b Press AT to select “INDEX
SEARCH,” and then press
► to display the INDEX screen.
C
Press REW or FF to begin the scan.
• As each index mark is reached, a short
playback will be performed after which
FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
Start here
INDEX
PRCX j HAM index search
SELECT:* w KEY
SET :► KEY
END :INDEX KEY
Current ! Program
1
REW|*~ Press
-»I
FF~^Hilfr
I
STOP
f Indexed Point
Play (for about 10 seconds)
— Fast Forward or Rewind
STOP I
23