Panasonic PVQ-M2508 - Manual (Page 12)

BHI Picture Adjustment
kX Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
1
Press ACTION to display the
MAIN MENU.
2
Press to select “TV,”
and then press ACTION to
display the SET UP TV screen.
MAIN MENU
\m
SELECT ;* ▼ ► KEY
SET lACTtON KEY
2
3
4
3
Press AV to select “VIDEO
ADJUST,” and then press
► to display the VIDEO
ADJUST screen.
.............. SET UP TV
CAPTION
INPUT SELECT
VIDEO ADJUST
SELECT: a t KEY
SET :► KEY
END
: ACTI ON KEY
4
Press AT repeatedly to select
the desired adjust item, and
then press to adjust. {See
description below.)
To Reset Picture Controls to
the Factory Setting
Press AT and ► to select and
set “NORMAL.”
All controls return to their factory
settings.
BRIGHTNESS
SHARPNESS
NORMAL
SELECT:* T KEY
ADJUST
KEY
END :ACTION KEY
COLOR ...................... I........
TINT
I........
BRIGHTNESS ........... I........
PICTURE .............................H
SHARPNESS .............I........
SELECT:* ▼ KEY
SET :► KEY
END lACTION KEY
5
Press ACTION three times to return to the normal
screen.
• If no button is pressed within 5 minutes, the video adjust overlay
disappears.
Picture Adjustment
COLOR Control
To adjust the intensity of the color.
TINT Control
To adjust for the most natural fleshtones.
BRIGHTNESS Control
To adjust the brightness of the picture.
PICTURE Control
To adjust the intensity of the picture by adjusting contrast and
color level at the same time and in the proper balance.
SHARPNESS Control
To adjust the sharpness of the picture.
12