beautypg.com

Introduction, Installation – Panasonic WZ-AESAD User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Introduction

The WZ-AKSAD is an option card to be installed in the AD Converter WZ-AD
96 and WZ-AD96M.

This card supplies an 8-channet, 24 bit, 96 kHz signal to the connected

MTRs.

Warning!

The installation shown below should be made by qualified ser­

vice personnel or system installers.

Installation

1. Plug off the power cord of the converter from an AC outlet.

2. Losen four screws as illustrated, then remove the

standard ARS/RBU output block from the rear par

of the AD Converter,

3. Place the option card into the opening, then push it

to the end.

4, Fasten the four screws to fix the option card.

See also other documents in the category Panasonic Printers: