beautypg.com

Adapting the pulse sensor – CatEye MODEL EC-1600 User Manual

Page 9

background image

10

Adapting the pulse sensor

This model detects and
displays your pulse rate
during exercise by the
pulse sensor from your
earlobe. Being a sensitive
electronic part, the pulse
sensor must be handled
with sufficient care.

1. Connecting the pulse

sensor

• Insert the pulse sensor plug into

the sensor jack on the back of con-
trol unit.

2. Handling of sensor cable

• Attach the sensor clip on the

handlebar with the sensor cable in
between, and adjust the length of
the sensor cable.

• When not in use, keep the earlobe

sensor attached on the clip.

sensor clip

pulse (earlobe) sensor

cable clip

R E S E T

M O D E

A D V

pulse sensor jack

pulse sensor plug

11

3. Using pulse sensor

during exercise

• Clip the pulse sensor at the center

of your right or left ear lobe.

• Ear rings or other ornaments must

be removed before attaching the
sensor and during exercise.

• When it is cold, massage your ear-

lobe before use to improve blood
circulation.

• Try not to change the position of

the pulse sensor during the exer-
cise.

• If the symbol frequently lights

up during use, remove once and
re-attach the pulse sensor.

• Attach the cable clip to your

clothes to prevent excessive
swinging of the sensor cable.

• Always clip the pulse sensor to the

sensor clip when it is not being
used. This sensor clip can also be
used to adjust the slack of the
cable.

• When removing the pulse sensor

after exercise, be sure to remove
also the cable holder.

• The pitch sound is cancelled if the

sensor plug gets out of the jack of
control panel. Pay attention to the
complete connection of the plug.

4. Checking the Pulse

Sensor

• You can check the function of the

pulse sensor on the LCD screen
during the exercise.

• Remove the pulse sensor from

your earlobe during exercise, then
close it.

• The pulse sensor is normal if the

pulse rate drops to zero and the

symbol goes out.

• If the pulse rate does not drop to

zero or if the

symbol remains

ON, the cable may be discon-
nected. If the cable proves to be
disconnected, replace the pulse
sensor with a new one (sold sepa-
rately).

pulse (earlobe) sensor

cable clip

E

pulse (earlobe)
sensor