To write the skip id signai, Skip piayback, Set the skip play button to the on position – Yamaha DTR2 User Manual

Page 27: To erase the skip id signai, 1 set the skip play button to the off position

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To skip undesirable sections using the skip ID

When the unit encounters a skip iD signai, the tape fast-
forwards to the beginning of the next tune.

To write the skip iD signai

During piayback, press the SKiP iD WRiTE button at the
beginning of the section to be skipped.

The button lights. Piayback stops temporarily and the skip

iD signai is written. (Whiie writing, the SKiP-iD indicator

flashes.)

SKIP PLAY

OFF^ ^ON

Fast-forward

Play back

Playback ^

1st tune I

2nd tune

Subcode 1

Subcode 2

Skip ID signal

Skip piayback

Set the SKiP PLAY button to the ON position.

When a skip iD signal is detected during playback, the tape
fast-forwards to the beginning of the next tune and

piayback resumes.
• When you want to piay a tape containing a skip iD

signai without the skip piay function, set the SKiP PLAY

button to the OFF position. The tape wiii be played
normally, but the skip ID signal is not erased.

To erase the skip iD signai

Set the SKiP PLAY button to the OFF position.

Piay the tune which contains the skip iD to be

erased, and press the SKiP iD ERASE button when
the SKiP iD indicator iights.

The tape is rewound to the position where the skip ID
was written. The SKiP iD indicator fiashes and the skip

iD is erased. Piayback resumes after the skip iD is

erased.