Notes – Yamaha DTR2 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting the remote control transmitter

By connecting the rennote control cable to the REMOTE jack on the rear panel, this unit can be operated with the remote
control transmitter.

NOTES:

• Do not strike or drop the remote control transmitter.

Also, do not get the remote control transmitter wet or

place it in a humid location.

Connecting headphones

•

Do not connect this remote control transmitter to other

equipment.

•

Connect only the supplied remote control transmitter to
the REMOTE jack.

For best results, use 8-ohm to 32-ohm headphones with a
standard stereo headphone plug 1/4” (6.3 mm).

The headphone volume can be adjusted with the PHONES

LEVEL control.

After connecting all equipment, connect the AC power cord

plug to an AC wall outlet.