Speaker settings, Front b speaker setting f runt b, Front speakers choices: large, small – Yamaha OWNER'S MANUAL HTR-6130 User Manual

Page 49: When the front speakers are large, When the front speakers are small, Center speaker, When the center speaker is large, When the center speaker is small, When you do not use the center speaker, When the surround speakers are large

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 SOUND MENU

Use this menu to manually adjust any speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors.

■ Speaker settings

Use this feature to manually adjust any speaker settings.

FRONT B speaker setting F RuNT B

Use this feature to select the location of the front speakers
connected to the FRONT B terminals.
Choices:

FRONT,

ZONE B

• Select “FRONT” to turn FRONT A and B on and off

when the FRONT B speakers are set in the main zone.

• Select “ZONE B” if the speakers connected to the

FRONT B terminals are set in another zone. If FRONT
A is turned off and FRONT B is turned on, all the
speakers including the subwoofer in the main zone are
muted and this unit outputs sound at the FRONT B
terminals only.

Notes

* •

• If you connect headphones to the PHONES jack on this unit, the

sound is output from both headphones and the FRONT B

terminals when “FRONT B” is set to “ZONE B”.

• If a DSP program is selected when “FRONT B” is set to

“ZONE B”, this unit automatically enters the Virtual CINEMA

DSP mode (see page 36).

Woofer section of a speaker i s 16 cm (6..5 in) or larger:
large
Woofer section of a speaker i s smaller than 16 cm

( 6 . 5

in): small

Front speakers

Choices:

LARGE,

SMALL

When the front speakers are large

Select “LARGE” (large).

When the front speakers are small

Select “SMALL” (small).

Note

When “BASS OUT” i.s set to “FRNT” (see page 46), you can

select only “LARGE” in “FRONT”. If the value of “FRONT” is
set to a setting other than “LARGE” in advance, this unit

automatically changes the value to “LARGE”.

Center speaker

Choices: NONE,

SML,

LRG

When the center speaker is large

Select “LRG” (large).

When the center speaker is small

Select “SML” (small).

When you do not use the center speaker

Select “NONE” (none). The center channel signals are

directed to the front left and right speakers.

Surround left/right speakers BUR:: LR

Choices: NONE,

SML,

LRG

When the surround speakers are large

Select “LRG” (large).

When the surround speakers are small

Select “SML” (small).

When you do not use the surround speakers

Select “NONE” (none). This unit is set to the Virtual

CINEMA DSP mode (see page ,36).