Using remote control on the scene feature, 1 press the desired i remote control – Yamaha OWNER'S MANUAL HTR-6130 User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Selecting the SCENE templates

Using remote control on the SCENE feature

■ Controlling the input source

components in the SCENE mode

You can operate both this unit and the input source

component by using the remote control. You must set the

appropriate remote control code for each input source in
advance (see page 53).

Press the desired i

remote control.

(SCENE button on the

■ Setting input source of the customized

SCENE template on the remote control

If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.

Press and hold the (DSCENE button and the

desired input selector button ((D) for 3 seconds.

Press the desired buttons in the * area below

to control the input source component of the

selected SCENE template.

Press the

(DSCENE

button again to operate the input source

component.

■SCENE buttons

Note

These buttons control the input source component. See

page 51 for details of the function of each button.