Yamaha Disklavier PRO Series - Manual (Page 9)

Press the [ENTER] button.
ENTER
Filtering KBD Out Data in Enhanced Mode
When sending data for the piano part you play on the Disklavier Pro keyboard in Enhanced mode to an
external MIDI instrument, the data contains keyboard touch data and continuous pedal data as well. These
data can be filtered so that only basic MIDI messages are output.
Connect the Disklavier Pro's MIDI OUT to the external MIDI instrument's
MIDI IN connector using a MIDI cable.
Set KBD Out to Enhanced mode as described in "Changing Modes" on
I page 8.
Press the [FUNC.] button.
FUNC.
The FUNC. indicator lights and the Function menu display appears.
Use the [i^ ] cursor button to position the !i^ cursor next to the MIDI
Setup option, then press the [ENTER] button.
^ ^ ENTER
The following display appears.
I'F-’iano +M.T.DI Uut
•+=h!0rMot.e +’Loca 1
10 Chapter 3: Enhanced Mode and XP Mode
Use the [i^ ] cursor button to position the
option, then press the [ENTER] button.
cursor next to the MIDI Out
ENTER
The following display appears.
1-11 ID I Liut-KBD Out.
See “Summary of the MIDI Out Parameter in a MIDI Setup” on page 78 and 79 of the
Advanced Operation Manual for details on the MIDI Out parameter.
Press the [^ ] cursor button.
J!____ ^
m
3
'S.
V?'
3*
A display similar to the following appears.
;:hP-0i ..tl.
F## LI q J
To set a split point, press the [^ ] cursor button until the following display
appears. Then, with the in cursor next to the Split parameter, use the
Dial, keyboard or the [-/NO] and [+/YES] buttons to select a key.
-•i- II'-S f - 1 i t- CC4 ]
i r-sins l__- 00 R- 00
A keyboard split point can be set from A-1 to C-7.
Filtering KBD Out Data in Enhanced Mode 11