Yamaha CLP-760 - Manual (Page 2)

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE TORTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘'dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte­
nance (servicing) instructions in the literature
accompanying the product.
INFORMATION RELATING TO POSSIBLE PERSONAL INJURY, ELECTRIC SHOCK, AND FIRE
HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
A U -When using electronic products, basic
^ ^precautions should always be followed,
including the following;
I Read all Safety and Installation Instructions, Explanation
■ of Graphical Symbols, and assembly instructions (where
applicable) BEFORE using your Yamaha electronic product.
Check unit weight specifications before you attempt to move this
instrument!
2 Main Power Supply Verification: Your Yamaha electronic
, product has been manufactured specifically for the main
supply voltage used in your area. If you should move, or if any
doubt exists, please contact your deder for instructions. The main
supply voltage required by your electronic product is printed on
the name plate. For name plate location, see “PREPARATION”
item.
3 This product may be equipped with a polarized line plug
■ (one blade wider than the other). If you are unable toinsert
the plug into the outlet, contact an electrician to have your
obsolete outlet replaced. Do NOT defeat the safety purpose of the
plug. Yamaha products not having polarized plugs incorporate
construction methods and designs that do not require line plug
polarization.
4 WARNING-D 0 NOT place objects on your electronic
m product's power cord or place the unit in a position where
anyone could trip over, walk over, or roll anything over cords of
any kind. Do NOT allow your electronic product or its bench to
rest on or be installed over cords of any type. Improper installa­
tions of this type create the possibility of a fire hazard and/or
personal injury.
5 Environment: Your electronic product should be installed
m away from heat sources such as a radiator, heat registers
and/or other products that produce heat. Additionally, the unit
should not be located in a position that exposes the cabinet to
direct sunlight, or air currents having high humidity or heat
levels.
6 Your Yamaha electronic product should be placed so that
■ its location or position does not interfere with its proper
ventilation.
7 Some Yamaha electronic products may have benches that
■ are either a part of the product or supplied as an optional
accessory. Some of these benches are designed to be dealer as­
sembled. Please make sure that the bench is stable before using it.
The bench supplied by Yamaha was designed for seating only.
No other uses are recommended.
8 Some Yamaha electronic products can be made to operate
■ with or without the side panels or other components that -
constitute a stand. These products should be used only with the
components supplied or a cart or stand that is recommended by
the manufacturer.
Q Do not operate for a long period of time at a high volume
^ ■ level or at a level that in uncomfortable. If you experience
any hearing loss or ringing in the ears, you should consult an
audiologist.
4 A Do not use your Yamaha electronic product near water or
I ^ ■ in wet environments. For example, near a swimming pool,
spa, or in a wet basement.
11
mgs.
Care should be taken so that objects do not fall, and
liquids are not spilled, into the enclosure through opcn-
4 O Your Yamaha electronic product should be serviced by a
* ^ ■ qualified service person when:
a. The power-supply cord or plug has been damaged: or
b. Objects have fallen, or liquid has been spilled into the product:
or
c. The product has been exposed to rain: or
d. The product dose not operate, exhibits a marked change in per­
formance: or
e. The product has been dropped, or the enclosure of the product
has been damaged.
j Q When not in use, always turn your Yamaha electronic
I O
■ product “OFF”, The power-supply cord of the product
should be unplugged from the outlet when it is to be left unused
for a long period of time. Notes: In this case, some units may lose
some user programmed data. Factory programmed memories will
not be affected.
<4 A Do not attempt to service the product beyond that de-
I ■ scribed in the user-maintenance instructions. All other
servicing should be referred to qualified service personnel.
4 c Electromagnetic Interference (RFI). This series of
I
w ■ Yamaha electronic products utilizes digital (high fre­
quency pulse) technology that may adversely affect Radio/TV
reception or the operation of other devices that utilize digital
technology. Please read FCC Information (page 60) for additional
information.
PLEASE KEEP THIS MANUAL
FOR FUTURE REFERENCE!