Panasonic TX-56P800H - Manual (Page 25)

29-OCT-2004 13:14 FROM TO opgrating instr
Picture
P.25
C. TEMP {Colour Temperature)
Set the overall colour tone of the picture.
— Press to switch between modes
I—^STANDARD^"^ WARM COOL^ C,„ TEMP }j
P»NR (Picture Noise Reduction)
Automatically reduces undesired picture noise.
-- Press to switch between modes
[:t
■> STRONG ^ OFF ^
AUTO^^----- 5^ WEAK
AE (Artificial intelligence)
Automatically analyses the incoming picture and processes
it to give improved contrast and optimum depth of field.
ON ^ -> OFF
SCAN MODE
When receiving PAL or SECAM Signal, SCAN MODE is
displayed,
Choose the screen refresh method:
Press to switch between modes
too H 2 MODE-^ PROGRESSIVE
"tern MODE'' ~ ^
When receiving PAL or
SECAM Signal
MODE Function
100 Hz MODE 10OHz will give a steady picture for most signal transmission.
PROGRESSIVE Avoids “snaking/jaggy'' effect when viewing TV program with
moving characters.
■tOOHa'
Switching is also possible using on the remote control.
Note:
When viewing a PAL transmission (othgr than PAL 60) with Sean mode set to Progressive, the screen
will flicker, this is not a fault.
I
,
Helpful Hint (iSNormaiization)
By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed
to the Normal Mode.
Normalization will not occur if the menu is not displayed when the '“N" Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called ''Normalization'’.
25