Panasonic TX-56P800H - Manual (Page 19)

29-OCT-2004 13:13 FROM
TO opgrating instr P. 19
Tuning Channels
Manual Tune
Before Manual Tune, Channel Select and Regional System must already be set (Refer to page 16).
1 MANUAL TUNE
f
ti..': ..V
STR
G
Press to select the MANUAL TUNE.
Press to access to the MANUAL TUNE.
TV/AV
CG
Press to select the desired Programme Number,
Press to select the higher or lower channel.
^ Search Start.
When a station is found.
When the desired station is found, press to store.
The tuning
position is memorized.
Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
2 SOUND SYS
SETUP
Press to display the SETUP MENU.
Proceed to the TUNING MENU, and then to the SOUND SYS (refer to page 13].
3
Adjust the Sound System (refer to page 16 step 2 to 3).
Helpful Hint
( 1 ) If'a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour
System Selection” operation on page 2 1 .
(2) After the Manual tun® or the Automatic tune ia finished, under the normal viewing condition press this button
to confirm the tuning condition tor each Programme Number. If some Programme Numbers are unused (no
TV stations), it is possible to skip such Programme Numbers. Please refer to the Programme Number Skip
operation on page 2 0 .
(3) When using a VCR without video and audio inpui/outputterminals, it is convenient to connect the aerial cable as indicated in the
instruction manual of VCR and to set the designated channel to programme No. “0". in that case, perform manual tune after
setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the designated
channel to several programme Numbers.
19