Checking a timer programme, Cancelling a timer programme, Cancel – Panasonic NV-HD 630 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking a Timer Programme
• The VCR must be turned on, or the timer recording
indicator “H" lit.
• Confirm that the TV is on and the VCR viewing channel is
selected.
Press PROGXHECK twice.
a
Cancelling a Timer Programme
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press PROGiCHECK twice.
2 Press PROG./CHECK repeatedly
until the desired timer programme
number flashes on and off.
a
3
Press CANCEL.
CANCEL^
Note;
If timer recording is not completed (due to insufficient tape
or cancellation by the user), the programmed timer
recording data will be cancelled from the memory by
4 A.M. two days later.
However, if, at that time, the timer recording function is
activated, the programmed timer recording data will be
cancelled at 4 A.M. the next day.
31