Panasonic NV-HD 630 - Manual (Page 22)

Option Setting
To Select the Corresponding Video
Cassette Tape Length to Display the
Approximate Remaining Tape Time
(TAPE SELECT)
1 Press MENU.
2 Select OPTION.
On Screen Display
ci:)
CD S L L t C i
EWU
iDS.EfJFL’H
I_____________ ______
J
3 Select TAPE SELECT.
4 Select the corresponding video cassette tape length.
© @
El 80: For E30, -60, -90, -120, -150 and -180 tapes.
El 95: For E195 tape.
E240: For E240 tape.
E260: For E260 and -300 tapes.
• The remaining tape time may not be displayed
correctly depending on the tape used.
5 Press MENU twice to make the on screen display
disappear.
(MENU
To Select the Colour TV system of the TV
used to Record by NTSC Signals from an
External Signal Source
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC INPUT SELECT.
C£>
Select AUTO.
Allows NTSC 4.43 or 3.58
signals to be distinguished
automatically.
© ©
3.58:
• Normally set at this position. If the tape has not .
recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals from an
external signal source.
When recording NTSC 3.58 signals from an
external signal source.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
5 Press MENU twice to make the on screen display
disappear.
( m I n DI
To Select the Colour TV system of the TV
used to play back a tape recorded by
NTSC signals
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC PB SELECT.
4 Select the desired position according to the colour TV
system of the TV.
© ®
HTSCWPin^SIUCT
mac n SELECT
( m P alt V
HTSCCONVeiTTER (OPP
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signsds.
3.58: For TVs that can receive NTSC 3.58 signals.
Press MENU twice to make the on screen display
disappear.
22