Panasonic NV-L25 - Manual (Page 22)

o
PROG
□
Q Select the programme position (channel) to be re­
corded.
^ Press the OTR Off (+) or (-) Button to set the OTR
ending time to 11:00.
• When the tab of the inserted video cassette is broken
out, it will be ejected automatically.
•The “OTR” indicator will be displayed.
• The VTR will automatically switch off, when the OTR is
completed. To turn the VTR on again, press the VTR
On/Off Switch.
When the Check/Programme Button is pressed once, the
present time will be displayed.
a
№
111
i u
OTR IRK I
i U D
PROG □
Q ■ i i-i
-! ■ I U:
When the Clock/Counter Selector Button is pressed during
OTR recording, the display will change over to the counter
mode.
a
iHSCI
SP
CLOCK/COUNTER □
n • i“i i“I i”i n
L! ■ i_i iJ. i-i i_i
• When the tape reaches its end during an OTR the
VTR will turn itself off.
• Make sure that the OTR Function (One-Touch
Timer Recording) does not overlap a programmed
timer recording. An OTR always takes precedence
over a timer recording.
• It is possible to change the OTR starting time or the
ending time before the recording starts.
• It is possible to perform any VTR operation (except
timer recording) until the recording starts.
• It is possible to change the OTR ending time even
during the recording.
• To interrupt an OTR, press the VTR On/Off Switch
to turn the VTR off.
• Disconnect all cables from the Video Input and Au­
dio Input Sockets before starting the recording. If
they remain connected, it is impossible to record TV
programmes.
22;