Repeat playback, Ntsc playback – Panasonic NV-L25 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Repeat Playback
; and the Btd oi tti^Tape
^ Press the Memory/Repeat/Search Button so that the
Repeat Indicator ‘"R” lights up.
0 Press the Play/x2 Button.
•The playback will continue until the end of the tape
At this point, the tape will be rewound to the begin
ning and the playback will be repeated.
0 To stop the Repeat playback, press either the Stop
Button or the Memory/Re peat'Search Button (the Re
peat Indicator "R" will go out).
Tapes recorded in the NTSC system can be played back
with this VTR via a PAL system TV set.
NTSC Playback
•Depending on the TV set used, the picture may shrink
vertically, and black bars may appear both at the top and
bottom of the screen.
This is not an indication of a malfunction.
•And the playback picture may roll up or down, if the TV set
is equipped with a V-HOLD control, it may be possible to
stop the picture movement by adjusting this control.
•The special playback functions (except normal playback)
cannot be used for NTSC recordings. This is not an
indication of a malfunction.
• Recording in the NTSC system is not possible with this
VTR. Insert editing and audio dubbing also would not
function correctly, so please do not operate these func
tions.
17;