Panasonic CD-R/RW CF-VCW721 - Manual (Page 10)

Troubleshooting
The computer does not recognize the
CD-R/RW Drive Pack
Check the settings by following the instruc­
tions in “Software Preparation’
® Is the CD-R/RW Drive Pack properly
mounted in the multimedia pocket‘d
The MP indicator {^) does not light Is the disc loaded on the tray correctly'^
Cannot play disc or read data from it Is the disc bent, scratched, or dirty‘s
Cannot eject disc Is the computer powered on'^
To remove a disc when the computer is pow­
ered off, insert a sharp object such as the bent-
out tip of a paper clip into the emergency hole
Pushing It completely to the end will free the
tray so that it can be pulled out
A blue background appears on the screen
with the MPEG image
Did you open the CD-R/RW dnve or remove
the MPEG disc while it was operating‘s
Re-insert the MPEG disc and close the CD-R/
RW dnve Press ( Enter) /e Kress r timer j
touch the eject button when you close
?
The disc tray does not close Did you
the tray‘s
The computer hangs or reboots is an external CD-ROM drive or DVD-
ROM dnve connected^
When the CD-R/RW Drive Pack is in­
stalled, do not use an external CD-ROM
drive or DVD-ROM dnve
Was the computer turned otf before the in-
stallation/removal of the CD-R/RW Drive
Pack‘d
The computer needs to be off so that the
CD-R/RW Dnve Pack can properly mitial-
ize dunng Windows startup
• Has BaySwap been updated'^
10