Iwjnscws^wol, Create backup disks for reinstallation – Panasonic CF-28 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

— Create BACKUP Disks for Reinstallation —

When [You do not need to make “BACKUP DISK”] is displayed (procedure @ below),

there is no need to create a BACKUP DISK. If this message is not displayed, create
backup disks for reinstallation. To create backup disks, the floppy disk drive and format
ted 2HD floppy disks are needed.

(Ï) Make sure a disk is not in the write-protected state and set it.

iWjnScws^WOl

Select [Start] - [Programs] - [Panasonic] - [Cre
ate Backup Disk] and follow the on-screen in
structions.

Select [Start] - [All Programs] - [Panasonic] -

[Create Backup Disk] and follow the on-screen

instructions.

Place a label identifying the contents on each

disk.

Insert the shutter-side

headfirst.

• Names of created BACKUP DISK

FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the

disk by following the on-screen instructions.)

(iaaMts«))

Store the floppy disks in a safe place. They will enable you to return your com
puter to factory default settings should any problems occur.

When creating backup disks and the message [Insufficient files to copy] is dis

played, select [OK] and then contact Panasonic Technical Support.

While the MP indicator (^) is on, do not remove the floppy disk, power down

your computer or enter either the standby or hibernation mode (

= “Standby/

Hibernation Functions”).
When creating backup disks, do not run any other application program.
Be sure to create the backup disk.

If a backup disk is not created, it will be impossible to return the computer to its

original state. In this case, contact Panasonic Technical Support.