Cassette tapes, Hold operation – Panasonic RQ-V460 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AC Power operation
(Refer to 1^.)
Connect the AC adaptor (Use only Panasonic AC adaptor,
RP-AC33, optional) as shown in the figure.
Note:
To operate on battery power, unplug the AC adaptor unit from the
household AC power outlet and the DC input jack on the unit.
•If you leave the AC adaptor jack connected to the DC input jack
while disconnecting the AC adaptor unit from the AC power outlet,
the memorized contents for radio will be cleared.
When the battery indicator flashes and you wish to use the AC
adaptor, be sure to connect the AC adaptor before removing
the spent batteries.
Cassette Tapes
This unit is equipped with an auto tape select function, so you can
use normal, CrOa or metal types of tape.
Notes:
•Cassette tapes, both recorded and unrecorded, should not be
stored in locations with high temperature, high humidity or direct
sunlight. Never place a recorded cassette near a magnetic source,
such as a magnet or a TV set as this may affect tape performance.
•Do not use C-120 tapes with this unit because these tapes can
easily becomes broken or stretched if not used with extreme care
and may get tangled with the capstan and pressure roller.
Hold Operation
Setting the hold switch to "HOLD” position will hold the present
condition, and reject the operation of the front panel buttons.
This is useful to prevent unexpected operation.
(The hold indicator will appear on the display.)
Before operating the front panel button, be sure to release the hold
condition. (The hold indicator will disappear.)
- 8 -