Release the hold state, To turn off the radio, Radio reception – Panasonic RQ-V460 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Radio Reception
1. Release the hold state.
The hold indication will disappear.
2. Press the radio on/off«band select button to turn on the
radio.
The frequency display will come up.
3. Press the radio on/off • band select button again to select the
desired band.
The “AM" and “FM” will appear alternately.
4. Press the tuning button to tune in your favorite station.
Pressing either of the tuning buttons one by one makes the
frequency display change. (AM step by 9 kHz, FM step by
0.05 MHz)
Repeat the pressing until the frequency of the desired station
appears.
To turn off the radio
Press the radio on/off-band select button for more than 1 second.
Antenna
FM:
The earphones cord serves as the FM antenna, hence be sure to
use it extended, not coiled.
AM:
The sensitive ferrite core antenna inside the set will provide excellent
AM reception in most areas. For optimum reception, turn the set in
the direction which gives the best results, since the ferrite core
antenna is directional.
FM mode selector
To receive FM stereo broadcasts, set the FM mode selector to
“STEREO". If reception is poor (excessive noise), set to “MONO".
This will reduce the noise and provide clear reception: however, the
broadcast will not be heard in stereo.
•When receiving the FM stereo broadcasts, the stereo indicator will
appear.
- 11 -