Panasonic SC-BT730 - Manual (Page 19)

STEP 6: Smart setup / Easy setup
The Smart setup / Easy setup assists you to make
necessary settings.
Follow the on-screen prompts to make basic settings for the
system.
|[Hi3tT!l liiicKiii : Smart setup
Easy setup
OK
Preparation
• Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to
this unit.
• |3B]3 : Place the Auto speaker setup microphone at
the actual seating position. (At ear level when seated.)
1 Press [c!)].
2 Follow the on-screen instructions and
make the settings with [A, T, ◄, ►] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
BBIQ- Speaker check
Check if the connection to each speaker is valid.
i:ir 4 cin Auto Speaker Setup
Adjust the speaker output level automatically.
Speaker Output
Make surround sound setting for speaker output.
Cinema Surround
The function creates the sound of virtual speakers to
enhance the realistic surround feeling as if the sound
comes from all directions.
(Speakers position: Surround Layout only)
(Effective when playing video with 5.1/7.1ch audio)
TV Audio
Select the audio input connection from your TV,
[item with “(TV)"].
Quick Start
Speed of startup from power off is increased.
3 Press [OK] several times to finish the
“Smart setup” or “Easy setup”.
After completing “Smart setup" or “Easy setup", you can
perform “Network Easy Setting".
tti
• You can perform this setup anytime by selecting “Smart setup" or “Easy
setup" in the Setup menu. 38)
• Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
I
o
I
«#5
ta
• Keep as quiet as possible during the Auto speaker setup. Excessive
background noise may lead to incorrect settings.
• The speakers output loud test signals during setup.
• After the Smart setup is completed, unplug the Auto speaker setup
microphone and keep it for future use.