Dtv mode, Component video connection helpful hints, Operation – Panasonic SVGA Monitor/Receiver CT-36DV60 User Manual
Page 45: Component video connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DTV Mode
Component Video Connection
Helpful Hints:
An input signal must be connected to the input
terminals of the monitor, in order to access PC
and DTV mode Icon menus.
Operation
1. Select DTV mode from the TV/PC/DTV menu (located in the TV/PC/DTV Icon).
2. Connect audio/video cables from the Component Video output terminals to the monitor DIGITAL TV INPUT
terminals, as shown.
NOTE: To operate your Monitor with component video devices properly, refer to the instructions furnished with the
component video device.
Helpful Hints:
When there is no signal applied, the Icon menus in
the PC and DTV mode will appear small and
distorted.
This is a normal condition.
TERMINALS ON BACK OF DEVICE
TERMINALS ON BACK OF MONITOR
To audio/video
input of monitor
audio/video Cable
(not supplied)
- 4 4 -