Panasonic SVGA Monitor/Receiver CT-36DV60 - Manual (Page 10)

Installation (cont’d.)
TV Antenna/Cable Connections
Antenna Connection - For proper reception of VHF/UHF channels, an
external antenna is required. For best reception, an outdoor antenna is
recommended. In the SETUP menu, set the MODE to TV. (Refer to Antenna
Mode section.)
Indoor Outdoor
Typical VHF/UHF Antenna
Incoming Cable from Home Antenna
VHF/UHF
75 Ohm on Back of Set
VHF/UHF
on Back of Set
or
300 Ohm
300 to 75 ohm Matching
Transformer (Not included)
Cable Connection - For reception of cable channels, connect the cable supplied by your local cable company. In
the SETUP menu, set the MODE to CABLE. (Refer to Antenna Mode section.)
Incoming Cable from Cable Company
75 Ohm
VHF/UHF
On Back of Set
Note: Certain cable systems offset some channels to reduce interference, or have premium (scrambled)
channels. A cable converter box is required for proper reception. Check with your local Cable company for
compatibility requirements.
Other Video Equipment
VCRs, Video Disc Players, Computers, TV games, and DSS equipment can also be connected to the antenna
input connection.
Care and Cleaning
Picture Tube (Turn television off)
Use a mild soap solution or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid
excessive moisture and wipe dry.
Plastic Cabinet
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean
cloth. Avoid excessive moisture. Do not use benzene, thinners or other petroleum- based cleaners.
Remote Control Transmitter
Use a soft cloth slightly moistened with a mild detergent and then wipe dry with a soft clean cloth. Avoid excessive
moisture. Do not use benzene, thinners or other petroleum-based cleaners.
-
9
-