Pc input connections (front), Pc input connection (front) – Panasonic SVGA Monitor/Receiver CT-36DV60 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PC Input Connections (Front)
Operation
1. Select PC (Front) from the TV/PC/DTV menu (located in the TV/PC/DTV Icon).
NOTE: To select PC (Rear) press the INPUT button, while PC (Front) is highlighted in the TV/PC/DTV menu.
2. Connect a 15-pin Connector cable (the supplied cable meets FCC standards) from the computer 15-pin
output terminal to the monitor PC INPUT 15-pin terminal, as shown.
3.
Connect an Mini-jack cable from the computer Audio output sound source jack to the monitor AUDIO INPUT
jack, as shown.
NOTE: To operate your Monitor and computer properly, refer to the instructions furnished with
the computer.
TERMINALS ON FRONT OF MONITOR
(LOCATED BEHIND FRONT CONTROL DOOR)
Helpfui Hints:
An Input signal must be connected to the input
terminals of the monitor, in order to access PC and
DTV mode Icon menus.
Helpful Hints:
If the monitor image is scrambled after connecting to a computer,
refer to the troubleshooting section for changing the computer
resolution.
scrambled image
- 3 8 -