Panasonic SVGA Monitor/Receiver CT-36DV60 - Manual (Page 43)

Set Up Features
Heipfut Hints:
Setting PC Mode Set Up Features will also change
TV Mode and DTV Mode Set Up Features. -
Auto Power On - This feature automatically
turns the monitor ON when AC power is applied.
1. Press .
2. Press
A
or and or ^ to select the Set
Up Icon.
3. Press ^3) to display the Set Up menu.
A U T O P O W E R O N
G E 0 M'A'G N EiTIClC 0 R R
‘EEQ
ROffll
NOTE: Setting the Auto Power On feature will cancel
the time and timer control setting. Also, the TV Mode
Main Menu Icon for the Control will be replaced with an
Exit icon.
4. Press A or ^ to highlight AUTO POWER ON.
5. Press ^ or ^ to select SET.
6. Press twice to exit menus.
Geomagnetic Corr (Correction)
This monitor incorporates a special adjustment feature
for the convenience of the customer. This adjustment is
preset at the factory. However, adjustment may be
required when the monitor is moved (due to the
influence of earth’s magnetic field) which may cause
the picture to tilt slightly. If necessary, follow these
procedures to adjust the tilt.
1. Press
2. Press ^ or
Set Up Icon.
3. Press ^3
A
or
W
and or ^ and ^ or to highlight the
to display the Set Up Menu.
AUjTOlR.O.WERlON
G E O M A G N E T I C C O R R
4.
Press
A or to highlight
GEOMAGNETIC
CORR. r
5. Press ^ or ^ to display the Geomagnetic
Correction adjustnrient menu.
tilt adjustment bar
6. Press or to adjust the picture tilt until left
and right side of tilt adjustment bar is parallel to the
bottom of picture frame (if necessary).
NOTE: Discoloration may be visible in picture
corners if tilt bar is not parallel to the
bottom of picture frame.
7. Press ibEisUl twice to exit menus.
Input Select
This feature is used to select PC Input Front or PC
Input Rear for the monitor Input signals.
1. Presses.
2. Press
A
or
W
and or to highlight the
Input Select Icon.
3. Press ^3) to display the Input Select Menu.
4. Press or to select FRONT or REAR.
NOTE: PC Front or PC Rear can also be selected by
pressing the Input button while input Select
menu is displayed.
5. Press twice to exit menus.
- 4 2 -