Panasonic NV-SD400 - Manual (Page 26)

G-Code Programming
Programming is now easier than ever: simply enter the
G“Code number provided in the programme schedule
column carried by newspapers and magazines.
G-Code numbers are numbers which are assigned to each
programme listed in the TV programme schedule carried in
newspapers and TV guides. When these numbers are
entered, the numbers are converted into the actual
programming.
Preparations
• Insert a cassette tape with an intact erasure prevention
tab.
•Confirm that the TV is on and the VTR viewing channel is
selected.
•Turn on the VTR.
• Press VTR/TV to select the VTR mode.
Operations On Screen Display
1 Press G-CODE.
□
Enter a G-Code number.
Example: 123456
o«oDe
123458 —
PROORAMME SET:EKTER
ENO.-O.COOE
' if you have entered the wrong number, press
CANCEL and then enter the proper number.
0 Press ENTER.
□
ENTER
■ ,Q-CODE ,
. ;. 123485 ' .
(¡MDATEON OFF
*^4,-17SU ISiOO 17:00 8P
SELECTiDO -/+:0D
END;T1M£R BEC
•Confirm that the number corresponds to the right
programme. If the display looks like this:
r
.CHOATE ON OFF
rlTSU 1S:pO 17:00 SP
SELECT;Da W+;Q0
END;CrCOOE
select the programme position of your VTR which
receives the TV station you entered at step 2 using
button 0 and then press ENTER.
•To make any corrections, use buttons 0-0 as the
same way on page 24.
Press TIMER REC.
TIMER REC
©
Notes:
•To select the desired tape speed, press SPEED before
programming.
•When the G-Code number is used for programming, the
recording time may be slightly longer than the actual
programme time.
• Repeat steps 2 and 3 if ‘‘PROGRAMME IS
INCOMPLETE." appears.
•When programming two or more programmes, repeat
steps 1-3 before pressing TIMER REC.
•The procedures for checking and cancelling a timer
programme are the same as on page 25.
;6)