Base unit indicator, Charge indicator – Panasonic DATA LINK KX-TCL100-B User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Base unit indicator
CHARGE indicator
Red
The remote unit’s battery is being charged. This is
normal when the remote unit is on the base unit.
Off
The base unit is in the standby mode.
o|f the remote unit is connected to the optional AC adaptor (p. 18):
—When the remote unit is placed on the base unit, the CHARGE
indicator will not light.
—When the unit is not communicating, the battery is charged by the
optional AC adaptor.
IN USE indicator
Green
An active connection has been made between the
base unit and the remote unit.
Flashing
Green rapidly
When the remote unit is turned on, the Indicator will
flash rapidly for about 30 seconds.
Flashing
Green slowly
The signal is weak. Move the remote unit closer to the
base unit quickly and adjust the antenna. If the
indicator does not light steady green, communication
between the remote unit and the base unit will be
terminated within 40 seconds.
Off
The base unit is in the standby mode.