C> settings, Recharge – Panasonic DATA LINK KX-TCL100-B User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C> Settings
If you purchased an optional AC adaptor for the remote unit, the
remote unit must first be placed on the base unit for a few seconds to
obtain a security code.
Then lift the remote unit and insert the optional AC adaptor.
Recharge
When the ВАТТ LOW/CHARGE
indicator flashes or the unit beeps
intermittently, recharge the battery.
12
o|f all indicators flash when the POWER switch is ON, place the remote
unit on the base unit for a few seconds to update the security code.
o|f the remote unit is connected to the optional AC adaptor (p. 18):
—The ВАТТ LOW/CHARGE indicator remains solid red.
—When the remote unit is placed on the base unit, the CHARGE
indicator will not light.
—When the unit is not communicating, the battery is charged by the
optional AC adaptor. The remote unit does not need to be placed on
the base unit to charge.