Anti-theft system, Place the removable face plate into case, Install removable face plate – Panasonic CQ-DFX883U User Manual
Page 55: Security indicator, Panel removal alarm, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Anti-Theft System
This unit is equipped with a removable face plate.
Removing this face plate makes the radio totally in
operable. The security indicator will blink.
Place the Removable Face Plate
into Case
O Switch off the power of the unit.
0
Remove the removable face plate, (page 54)
o Gently press the bottom of the case and open
the cover. Place the face plate into the case and
take it with you when you leave the car.
Install Removable Face Plate
O Fit the face plate with its left hole on one of the
pins provided on the main unit.
© Fit the other hole on the other pin applying
slight pressure.
o
Move the face plate up and down a few times to
make sure it is secure. Then close the front
panel and press down the right side of the face
plate until it clicks into plate.
Security Indicator
The security indicator blinks when the removable
face plate is removed from the unit.
This function is activated when the security function
is on. (page 40)
Panel Removal Alarm
This alarm sounds to warn you not to forget to re
move the panel before leaving your car.
This function is activated when the security function
Is on. (page 40)
Caution;
• This face plate is not waterproof. Do not expose
it to water or excessive moisture.
• Do not remove the face plate while driving your
car.
• Do not place the face plate on the dashboard or
nearby areas where the temperature rises to
high level.
Do not touch the contacts on the face plate or
on the main unit, since this may result in poor
electrical contacts.
If dirt or other foreign substances get on the
contacts, wipe them off with a clean and dry
cloth.
To avoid damaging the front panel, do not push
it down or place objects on it while It is open.
CQ-DFX883U
55