Panasonic PV-M2738 - Manual (Page 17)

Record On a Tape
|\^Check list before you begin.
□ All connections are made (see page 5).
□ Your Combination VCR is plugged in.
1
Insert a cassette with record tab.
The Combination VCR power
comes on automatically.
2
4
3
Selecting the Input Mode
You can select the Input Mode in either of the
following ways.
■ Press CH AT , The display will change in
the order below.
— I ir
1 — 2 — 3
(CATV)
LINE-*
(CATV) (TV)
-125 or 69
D
a Press MENU to display the MAIN MENU,
b Press AT ◄ ► t o select “TV," and then
press MENU to display the SET UP TV
screen.
c Press A T to select “INPUT SELECT,”
and then press ► repeatedly to select
“TUNER” or “LINE.”
Press CH AT, or
NUMBERED keys
on the
remote control to select a
channel.
• Or, press CH * *▼ on the
Combination VCR.
• To record from an outside
source, press CH at to select
LINE input (see bottom of this page).
t STEREO
SAP
MONO
Press SPEED repeatedly
until the desired tape
speed is displayed (see
page 25).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
REC 02
Press НЕСЯ1МЕ on the
remote control to start
recording.
• Or, press НЕСЯ1МЕ on the
Combination VCR.
• To edit out unwanted portions,
press PAUSE to pause the
recording in progress. To
release, press PAUSE again.
• You can not view another channel during recording.
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
One Touch Timer Recording (OTR)
The Combination VCR stops recording at a preset time.
In step 4, press REC/TIME repeatedly to set the
length of the recording. Each press will change the
time as shown.
c
Normal Ree —*-0:30—► 1 ;00
4:00**—3:00-^ 2:00
► 1:00-v
1:30-*-^
The PROGRAM TIMER indicator lights on the front panel.
5
Press STOP on the remote control to stop
recording.
• Or, press STOP/EJECT on the Combination VCR.
• While it is possible to change the tape
speed when you are recording, there will
be some distortion on the tape where the
change occurred.
• The remaining recording time of an OTR
can be displayed by pressing DISPLAY.
• After the Combination VCR has been in
Rec Pause mode for 5 minutes, it will
stop automatically to protect the tape and |
video head. ^
17