Playback a tape, X check list before you begin, Caution – Panasonic PV-M2738 User Manual
Page 15: 1 insert a cassette, Special effects during playback, Features for a quality picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Playback a Tape
|\X Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
Caution:
Please inspect your cassette tapes
and remove any loose or peeling
labels to prevent them from
becoming jammed in your unit.
1
Insert a cassette.
• The Combination VCR power comes on automatically.
2
Press PLAY
on the remote control or Combination VCR
to start playback.
• Playback begins automatically if cassette has no record tab (see
page 16).
3
Press STOP
on the remote control or Combination VCR
to stop playback.
• To rewind the tape, press REW.
4
Press STOP/EJECT
on the Combination VCR to eject
the cassette.
• You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Press REW or FF
on the remote control or Combination
VCR to quickly locate a scene.
• Search speed for SLP mode tapes is 21 times the normal speed.
• Some noise bars will appear during search.
Special Effects During Playback
These features work best in SLP mode. The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motion playback. Press PLAY or SLOW to
release.
Still (Freeze) Frame Picture
Press PAUSE to freeze and release the picture.
• To reduce picture noise, first press SLOW. Next, use the 3 or 6
NUMBERED key on the remote control or CH
at
on the Combination
VCR to clear up the picture. Now, press PAUSE.
Frame by Frame Advance
While in Still mode, press SLOW repeatedly or hold down to advance the
still picture one frame at a time. Press PAUSE or PLAY to release.
(After the Combination VCR is in Still or Slow mode for 3 minutes, it will
switch to the Stop mode automatically to protect the tape and the video
head.)
Features for a Quality Picture
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or CH
at
on the
Combination VCR until the picture clears up.
To return to Auto Tracking, press POWER off and then on again.
PanaBlack™ Picture Tube
This Combination VCR uses a PanaBlack^“ picture tube for better color
reproduction and picture contrast.
15